DXL 5-1 TO 150-1
TSD-361
MODEL NUMBER DXL 5-1 DXL 7.5-1 DXL 10-1 DXL 15-1 DXL 15H-1 DXL 20-1 DXL 30H-1 DXL 30-1 DXL 60H-1 DXL 60-1 DXL 100H-1 DXL 100-1 DXL 150H-1 DXL 150-1
Discharge diameter - inch (mm) 2" threaded male NPT 3" threaded male NPT 4" threaded male NPT 4" threaded male NPT JIS 10K 80 mm (3") JIS 10K 150 mm (6") JIS 10 100 mm (4") JIS 10K 150 mm (6") JIS 10K 150 mm (6") JIS 10K 200 mm (8") JIS 20K 150 mm (6") JIS 10K 200 mm (8") JIS 20K 150 mm (6") JIS 10K 200 mm (8")
Companion Flange (supplied) N/A N/A N/A N/A 3" threaded female NPT 6" threaded female NPT 4" threaded female NPT 6" threaded female NPT 6" threaded female NPT 8" threaded female NPT 6" threaded female NPT 8" threaded female NPT 6" threaded female NPT 8" threaded female NPT
Flow at rated point - USgpm (m3/min) 88 (0.33) 132 (0.5) 204 (0.77) 204 (0.77) 132 (0.5) 396 (1.5) 264 (1) 528 (2) 528 (2) 1056 (4) 528 (2) 1056 (4) 528 (2) 1056 (4)
Head at rated point - ft (m) 85 (26) 93 (28) 101 (31) 130 (40) 210 (64) 122 (37) 197 (60) 114 (35) 236 (72) 130 (40) 336 (102) 208 (63) 522 (159) 312 (95)
Impeller diameter - inch (mm) 5 3/4" (146)  6 9/16" (167) 6 10/16" (168) 7" (178) 7 13/16" (198) 7 1/8" (181) 8 1/2" (216) 8" (203) 10" (254) 7 5/8" (194) 10 7/8" (274) 8 5/6" (219.5) 11 1/2" (292) 9 3/16" (233)
Weight without cable - lb (kg) 121 (55) 146 (66) 205 (93) 287 (130) 287 (130) 420 (190) 685 (310) 630 (285) 1122 (510) 1122 (510) 1870 (850) 1870 (850) 2640 (1200) 2750 (1250)
Screen 8.5 mm (1/3") 8.5 mm (1/3") 12 mm (1/2") 12 mm (1/2") 8.5 mm (1/3") 6 mm (1/4") 12 mm (1/2") 12 mm (1/2") 6 mm (1/4") 20 mm (3/4") 8 mm (5/16") 20 mm (3/4") 10 mm (7/16") 19.5 mm (3/4")
Standard motor hp 5 7.5 10 15 15 20 30 30 60 60 100 100 150 150
Oil capacity - USgal (l) 0.25 (0.96) 0.29 (1.10) 0.20 (0.76) 0.20 (0.76) 0.21 (0.80) 1.02 (3.85) 1.82 (6.90) 1.82 (6.90) 1.27 (4.79) 1.27 (4.79) 1.72 (6.50) 1.72 (6.51) 2.11 (7.98) 2.11 (7.98)
Min. Water Level mm (in) 150 (5.9") 150 (5.9") 190 (7.5") 190 (7.5") 200 (7.8") 180 (7.1") 180 (7.1") 180 (7.1") 180 (7.1") 180 (7.1") 200 (7.8") 200 (7.8") 200 (7.8") 200 (7.8")
Speed (rpm) 3410 3430 3440 3480 3465 3465 3490 3490 3530 3530 3520 3520 3500 3500
Voltage 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575 460 / 575
Motor Protector - Klixon CLIX2 CLIX2 CLIX2 CLIX2 CLIX2 CLIX2 CLIX2 CLIX2 MTP3 MTP3 MTP3 MTP3 MTP3 MTP3
Insulation Class F F F F B B B B F F F F F F
Rated Current (amps) 6.5 / 5.3 9.5 / 7.3 12.5 / 9.7 18.0 / 14.3 18.5 / 14.8 24.0 / 18.0 35.0 / 28.0 35.0 / 28.0 67.0 / 53.0 67.0 / 53.0 112.0 / 91.0 112.0 / 91.0 180.0 / 136.0 180.0 / 136.0
DOL Starting Current (amps) 60 / 43 85 / 62 118 / 85 155 / 120 155 / 120 175 / 128 288 / 209 288 / 209 600 / 3901 600 / 3901 1006 / 8151 1006 / 8151 1120 / 9601 1120 / 9601
Starting method D.O.L. D.O.L. D.O.L. D.O.L. D.O.L. D.O.L. D.O.L. D.O.L. Star Delta Star Delta Star Delta Star Delta Star Delta Star Delta
Moisture sensor + relay N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A YES YES YES YES
Number of Electrical Cables 1 1 1 1 1 1 1 1 1 1 1 1 2 2
Power Cable AWG (qty) #14 (3) #12 (3) #10 (3) #8 (3) #6 (3) #6 (3) #4 (3) #4 (3) − − − − #1 (3) #1 (3)
Power & Sensor Cable AWG (qty) − − − − − − − − #2 (6); # 14 (2)  #2 (6); # 14 (2)  #2 (6); # 14 (3)  #2 (6); # 14 (3)  #1 (3); # 14 (3)  #1 (3); # 14 (3) 
Total Number of Conductors + (1) GND 4 4 4 4 4 4 4 4 9 9 10 10 10 10
Optional Extra Long Cables Available YES YES YES YES YES YES YES YES Use SHD4 Use SHD4 Use SHD4 Use SHD4 Use SHD4 Use SHD4
STD Cable Diameter OD (mm) 14 17 19 21 21 26 32 32 40 40 40 40 36 36
Materials of Construction:
Mechanical Seal  (upper) - Silicon Carbide/Carbon (5-60 Hp); Silicon Carbide/Silicon Carbide (75-150 Hp)                
(lower) - Silicon Carbide/Silicon Carbide                
(elastomers) - NBR Rubber (Nitrile/Buna N)                
Casing - Cast Iron
Impeller - High Chrome Cast Iron                          
Shaft - 420 Stainless Steel                        
Motor Frame - Cast Iron, ASTM A48 Class 35                
Fasteners - 304 Stainless Steel                
  Maximum Water Temperature:  40 ºC (104 ºF)                
  Oil:   ISO VG32 Turbine Oil (SAE 10)                    
  Notes:
1 - Star Delta starting amps are approximately 1/3 DOL starting amps listed.                    
2- CLIX (Clixon/Circle Thermal Protector) This is a temperature and amperage sensitive switch mounted inside motor enclosure.  It is a normally closed switch that opens if                                                                                             
motor overheats or high current conditions exist.  This switch is wired internally in line with the windings and shuts the pump down when it opens.  As the switch cools it will                                                                                            
automatically reset and the pump wil restart.  (Does not replace the need for correctly sized starters and overoads.)                                                                                            
3 - MTP (Miniature Thermal Protector) On higher HP pumps there are 3 MTP's installed, one in each winding. The MTP is a normally closed temperature activated switch that                                                                                            
opens if the motor overheats.  The two control wires in the electric cable should be connected to a contract protection relay (not supplied) to trip a warning alarm or motor
 shutdown (does not replace the need for correctly sized starters and overloads).  MTP contact rating is 13A @ 230VAC or 5.5A @ 460 VAC.
4 - 60 to 150 HP Pumps  The standard cable on these models has multiple conductors to access sensor information and is only stocked in 50ft lengths.  If longer cables are
required order pump with SHD cable option (see TED 362 for specifications) or order pump with sensors deleted.